I was surprised actually, this was all done in sectional track, the straights and 22" radius are all Atlas NOS bulk I bought a couple years ago for pennies on the dollar, threw it in a cardboard box and there it sat till now. I currently have two power feeds, didn't solder any of the joiners, gave everything a quick wipe with a 3M pad and some alcohol and DCC and DC run fine. I'm adding more feeds, prolly go with one every 3 feet, have a Parts Express order on the way for the stuff for the control panel, an issue popped up with the DCS Commander I use that doubles as my DC controller, the throttle wheel is becoming very unresponsive, since it's digtal I'm going to assume they use some kind of optical sensor that needs cleaning.
Been going through engines and rolling stock now, see if any just won;t run with the steep inclines, have a few decoupling issues with some on the break overs but none I can't live without. The Bachmann "Alaska Railroad" cars are definitely not going to be running on it, but that was a total impulse buy I never could explain... on the other hand, I have some UP passenger sets from Riv that like it just fine.