I've started the build of the kit.
This is the box art:
It's actually a very uncomplicated kit, but it has a lot of potential!
The contents of the kit, it seems to be made of ABS. It glues well with MEK.
The walls are shiplap siding, but in my opinion a bit too plain.
I decided to add some wood grain on the planks.
I use an Xacto blade to scribe the plastic.
I scribe with the side of the blade, when it makes nice corkscrews of plastic, you got the right technique.
While I was at it, I decided to add some nail holes and plank ends.
I measured a framing on the surface with 2' centers.
I embossed the nails with a tool I made using a wooden handle with a sharp compass needle mounted in it.
I used thin plastic cement (MEK) to get a really good joint.
I had to fill some joints after gluing the main structure together. I use correction fluid as a filler.
I primed the structure with grey spray primer before painting the walls with an old wood color. That makes the walls ready for paint.