railBuilderDhd
Active Member
I have a Broadway Limited Blueline GE C30-7. I had to reset the decoder to default because the locomotive stopped responding. When I did this the loco worked fine with address 03. When I tried to change the address to 4 number address the loco would work with the new address but the light no longer worked. When I program the address back to 03 the lights work again. I have a Digitrax Zephyr I used to program the locomotive and think this could be an issue. I recall the Broadway Limited may have needed the PR3 to program their decoder.
I did try to program the decoder on the program track with PAGE and also on the mainline with OPS. I also tried to program the new address with CV29 and not just the long address option on the Zephyr.
I'm sure I'm missing something or I tried something else but don't recall now.
Anyone have any thoughts on this or questions to help clear this up.
Thank you.
Dave
I did try to program the decoder on the program track with PAGE and also on the mainline with OPS. I also tried to program the new address with CV29 and not just the long address option on the Zephyr.
I'm sure I'm missing something or I tried something else but don't recall now.
Anyone have any thoughts on this or questions to help clear this up.
Thank you.
Dave