Anyone ever use this?
- Thread starter stearsmania
- Start date
goscrewyourselves
I'm the one
Not only have I not used it but I have not seen it before. Would be perfect for model railroading IF it worked.
stearsmania
Member
Found it on eBay. I think it's worth it to try it out.
goscrewyourselves
I'm the one
Give it a go and see what happens then let us know the results - I'm sure others would be interested in knowing how well (if at all) this works. If it did work, I could see it making putting in feeders much much easier.
logandsawman
Well-Known Member
Hello,
I bought some about 7 months ago and wouldn't be without it. It does require following the instructions, which means you let it set up for 24 hours. I cover my liquid solder joins with JB weld which both gives substantial strength and also creates a non conductive covering.
Here is where I used it to make a good connection on some tiny wires, a home made working signal:
I covered the liquid solder with a coat of JB weld epoxy.
lasm
I bought some about 7 months ago and wouldn't be without it. It does require following the instructions, which means you let it set up for 24 hours. I cover my liquid solder joins with JB weld which both gives substantial strength and also creates a non conductive covering.
Here is where I used it to make a good connection on some tiny wires, a home made working signal:
I covered the liquid solder with a coat of JB weld epoxy.
lasm
Last edited by a moderator:
stearsmania
Member
Thanks for the advice! I'm close to getting started on my layout! I'll be buying this!
