NVSrr1500's latest activity

Curious if anybody converted the bachamnn metroliner to a cab car. I am ebarking on that using a white box unpowered metroliner. And a...

Add a few notes. The RDC's are not the ones I had asked about metal wheel sets for. Maybe I will put one or two of those on and red...

Rush hour. The station is in the office building, technically on the second floor. Even tho the second floor is a t street level...

I found DCC concepts has the Hornby 14mm with their pickups already installed. I will look at the other before I do anything

When was that Climax made? It might have that split gear scuedge of the early 2000's. so many had that problem

I measured the axle length, 27 mm is what I have on the existing axles.

Yes, the part number is Hornby R8218 Gaugemaster list them here...

Thanks Smudge. They are the same as pictured. Measures to 14.1mm. I would still need the wipers tho. IS MM how they are listed in...

SO I have a couple of sets of ATT RDCs. Not going to Do any DCC or anything fancy. Just add lights, and try to add pick ups. which...

Nope. Just a make sure you have your couch and towel

This sound mo re like a math test question from middle school. It is just missing the two stations and two trains part

They side frames are seated as far in as they will go. even after using clamps to apply more pressure. They are in as far as...

the sw 1001 shoving a difco dump to a work site. Probably the same site this 25 ton crane is off too. Dragging along the short...

Sort of a train. Keep the trains rolling. The utility hi rail is a Bachman with an N scale decoder on board. The SRS is Walthers...

Turns out it has the QSi DCC sound unit factory installed by P2K. SO no new speaker since they are round. have to get a round one...