GuilfordRailman
Well-Known Member
Question says it all. I will be preparing to construct the roads and sidewalks on my layout and have come across two methods other modelers have been using. Is there an advantage to one over the other?
I’ll see what’s available at the local hardware store, thanks!Evergreen styrene is certainly easier. I use it for all structures that don't come with their own sidewalks. It comes in a multitude of pattern sizes.
Evergreen sidewalk sheets
Streets can be made with flat unscored sheets, but it's a whole lot cheaper to buy a cheapo styrene "Garage Sale" sign at your local Lowes, Home Depot or other big box building supply center.
This is good to know! I would have assumed both were made of the same material.@santafewillie love the tip on the signs. Wasn't aware. I notice Lowes has one that is advertised as styrene but home depot's is advertised as vinyl.
While they are different chemically from one another, they are used interchangeably in some applications. IIRC, Styrene is slightly more brittle than vinyl.@santafewillie love the tip on the signs. Wasn't aware. I notice Lowes has one that is advertised as styrene but home depot's is advertised as vinyl.
Interesting method! Might have to try that.I made sidewalks by cutting a strip of styrene to the width I needed then cut that into the correct size blocks.
This gave the sidewalk a bit of an uneven surface and was easy to add cracked or chipped corners.
Just a note, styrene and vinyl react differently to specific solvents and glues.