Portola Railroad Museum Needs Your Help!


Preserving Rare Quincy/Southern Pacific Diesel Locomotive


In 1950, EMD built their first demonstrator for a 'cow and calf' switcher set based on the 800 HP SW8. This model was designated TR-6.

This EMD demo set, numbered 1600 and 1600B, was sent to the SP and worked the Mina and Fallon branches with much success. SP purchased the demonstrators in April 1951 and renumbered them from 1600 and 1600B, to 4600 for the cab equipped A unit (cow), and 4700 for the B unit (calf). The SP also purchased 3 additional TR6 sets, numbered 4601 to 4603 (A units) and 4701 to 4703 (B units), later that year and assigned all 4 to the Northwestern Pacific for road and transfer service. At some point, they were all renumbered into the 1100 series (A-units) and 1150 series (B-units) along with SP's other SW8s.

Around 1961, all four of the TR-6B units were seperated from their A units and paired with 4 SP dynamic brake equipped SW8s for Roseville hump service. Two of the remaining TR6 As were retired and scrapped while the two survivors, SP 1100 and 1102, were assigned to Los Angeles as standard SW-8's. The B-units were eventually scrapped.

SP 1100 would eventually replace SW1 SP 1004 as the Sacramento shop switcher. In the mid-late 1980's, the 1100, the very first TR6A and now believed to be the sole survivor, was sold to Sierra Pacific Industries for use by the Quincy Railroad's operation of the SP's former Susanville Branch.

Only the SP and Oliver Iron Mining (which purchased 2 sets) owned the TR6A. Quincy 1100 is believed to be the sole survivor of this rare locomotive model and spent many years serving the Quincy Railroad. In summer 2004 it was donated to the Feather River Rail Society in operational condition for preservation in Portola.

The current plan is to place the Quincy 1100 into the Run A Locomotive program and give everyone a chance to personally enjoy this unique engine.

However, first it must be MOVED. Sierra Pacific would like to terminate their lease on the Susanville Branch. At that point, it is likely the line will be severed and perhaps torn up. As the 1100 has friction bearing wheels, it must travel by flat car before the branch is removed. We are unsure how much time remains but it is possibly only a matter of weeks. If the branch is severed, the cost to move the 1100 will likely triple as we will need to make a heady duty truck move at a much higher cost.

So far, over $1300 has been donated toward the estimated $5000 required to save and preserve this unique engine. We need the help of all SP, Quincy and WP fans to bring this piece of Quincy and SP history to Portola.

Donations can be sent to:

Quincy 1100 Fund

P O Box 608

Portola, CA, 96122



OR you can now use our new on-line PayPal secure donation method at the FRRS website.

Just go to http://www.wplives.org/FRRS_Home/Donate/donate.html for details.