Liliput Locomotive


milesjj

New Member
Hi, new here. I have a liliput HO train I have had for several years. I am in the U.S... What transformer or powerpack can I use with this engine that uses 110, and what track is the best for this train. It is AC.. Thanks for your time.. Very new at this.
 

Attachments

  • 20181216_132706.jpg
    20181216_132706.jpg
    395.9 KB · Views: 192
Hi. If it is AC then it will be 3-rail or more correctly for the Marklin Stud contact system and therefore will need a Marklin compatible controller.
The AC version of the loco will have a "Skate" underneath the centre of the loco or tender to make contact with the studs.
If it does not have the skate then it is probably 2-rail DC.
As above Reynaulds are Marklin agents so could supply a suitable controller.
Hope this helps.
 
Looks like there are AC and DC versions of their models. Any instructions in the case? Any third rail pickups present?
 
Hi. If it is AC then it will be 3-rail or more correctly for the Marklin Stud contact system and therefore will need a Marklin compatible controller.
The AC version of the loco will have a "Skate" underneath the centre of the loco or tender to make contact with the studs.
If it does not have the skate then it is probably 2-rail DC.
As above Reynaulds are Marklin agents so could supply a suitable controller.
Hope this helps.
Thank You.
 

Attachments

  • IMG_0907.jpg
    IMG_0907.jpg
    317.2 KB · Views: 170



Back
Top